HIGH THERMAL AND DIELECTRIC PERFORMANCE INSULATOR PAD
TgardTM K52 is a high thermal and dielectric performance insulator pad consisting of a
ceramic filled phase change compound coated on MT Kapton film.
TgardTM K52 phase change coating all but eliminates contact thermal resistance. The
phase change coating melts at 52ºC and replaces all contact areas that contain air.
TgardTM K52-1 is ideal for applications requiring the best thermal performing insulator
material.
TgardTM K52-2 has the best balance of thermal, dielectric and cut through performance.
TgardTM K52-3 is a 3 mil MT Kapton film that provides the best crush and cut and tear resistance available with thermal properties that are still in the high performance category.

HIGH THERMAL AND DIELECTRIC PERFORMANCE INSULATOR PAD
TgardTM K52 is a high thermal and dielectric performance insulator pad consisting of a
ceramic filled phase change compound coated on MT Kapton film.
TgardTM K52 phase change coating all but eliminates contact thermal resistance. The
phase change coating melts at 52ºC and replaces all contact areas that contain air.
TgardTM K52-1 is ideal for applications requiring the best thermal performing insulator
material.
TgardTM K52-2 has the best balance of thermal, dielectric and cut through performance.
TgardTM K52-3 is a 3 mil MT Kapton film that provides the best crush and cut and tear resistance available with thermal properties that are still in the high performance category.

HIGH THERMAL AND DIELECTRIC PERFORMANCE INSULATOR PAD
TgardTM K52 is a high thermal and dielectric performance insulator pad consisting of a
ceramic filled phase change compound coated on MT Kapton film.
TgardTM K52 phase change coating all but eliminates contact thermal resistance. The
phase change coating melts at 52ºC and replaces all contact areas that contain air.
TgardTM K52-1 is ideal for applications requiring the best thermal performing insulator
material.
TgardTM K52-2 has the best balance of thermal, dielectric and cut through performance.
TgardTM K52-3 is a 3 mil MT Kapton film that provides the best crush and cut and tear resistance available with thermal properties that are still in the high performance category.

Thermally Conductive Electrically Insulative Material
TgardTM 5000 is an excellent dielectric material with good thermal performance consisting of a polyimide
film coated with a ceramic filled high temperature silicone rubber.
TgardTM 5000 is ideal for applications that require a delta temperature across the interface of 2.0°C/watt or
higher on a TO-220 clip mounted @ 50 psi pressure.
TgardTM 5000 has high dielectric strength for the AC side of a switching mode power supply.
TgardTM 5000 is tough resulting in an exceptional cut-through resistant material.