Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。
供應商：

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。
供應商：

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。

Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列，被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm，間距和高電壓型的5.08mm間距兩種，前者主要為信號電路和電源電路用的規格，後者為高壓電源電路用的規格。

特別是電源用規格，隨著最近設備小型化，為滿足小型高功率的要求，使用新開發的銅合金，每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途， Dynamic系列都要支持。為此，要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念， D-3000系列 的 端子能夠適用於該系列的所有殼體，通過其殼體的豐富變化，Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績，在客戶提出意見的過程中獲得了發展。而且，目前也在進一步繼續發展延伸。