回首頁 > 所有商品 > Laird > Thermal Interface Materials > High Thermal Pad 回上頁
Laird HIGH THERMAL AND DIELECTRIC PERFORMANCE INSULATOR PAD
商品編號:LAI-TgardTM K52-3
點閱:
14,247

Laird TgardTM K52 Thermally Conductive Insulators Pad 萊爾德 TgardTM K52 導熱絕緣片
HIGH THERMAL AND DIELECTRIC PERFORMANCE INSULATOR PAD
TgardTM K52 is a high thermal and dielectric performance insulator pad consisting of a
ceramic filled phase change compound coated on MT Kapton film.
TgardTM K52 phase change coating all but eliminates contact thermal resistance. The
phase change coating melts at 52ºC and replaces all contact areas that contain air.
TgardTM K52-1 is ideal for applications requiring the best thermal performing insulator
material.
TgardTM K52-2 has the best balance of thermal, dielectric and cut through performance.
TgardTM K52-3 is a 3 mil MT Kapton film that provides the best crush and cut and tear resistance available with thermal properties that are still in the high performance category.
供應商:

FEATURES AND BENEFITS

• High breakdown voltage of 4,000 – 9,000 range VAC

• Resistant to tears and cut through

• Total thermal resistance of 0.13 - 0.30 range ºC-in2/watt at 20 psi clip force

APPLICATIONS

• Audio amps

• Power modules

• Switching mode power supplies

High Thermal and Dielectric Performance Insulator Pad

Tgard K52 is a high thermal and dielectric performance insulator pad consisting of a ceramic filled phase change compound coated on MT Kapton film.

 

Tgard K52 phase change coating all but eliminates contact thermal resistance. The phase change coating melts at 52ºC and replaces all contact areas that coresistance. The phase change coating melts at 52ºC and replaces all contact areas that contain air.

 

TgardTM K52-1 is ideal for applications requiring the best thermal performing insulator material.

Standard Die Cut Parts : Standard part sizes for TO-220, TO-247, TO-3P, TO-3PL, and TO-264 Custom Die Cut Parts : Custom configurations available with standard tolerance of 0.5mm (0.020”) Ability to handle drawings in multiple file formats. (.DXF and .DWG preferred) Pressure Sensitive Adhesive : Single side adhesive available on request Data for design engineer guidance only. Observed performance varies in application.Engineers are reminded to test the material in application.


商品規格

無商品規格資料
檔案下載

  • 0CC0DFED-B39D-A464-D500-CD697D0F973E.pdf
    1
    1
    THR-DS-Tgard-K52_032515.pdf