回首頁 > 所有商品 > TE > Dynamic Series Connectors > Dynamic D-1000 Series 回上頁
TE (泰科連接器)Dynamic D-1900D Double-row Spring Clamp Type 雙排籠式彈簧型
商品編號:TEC-2-1871935-1
點閱:
9,812

Dynamic系列強固型連接器 Dynamic D-1900D Board-Mounting Header Horizontal type
Series introduction
D-1000 Series are the smallest connectors for signal lines among all the Dynamic connector series.
The Dynamic 1000 Series consists of 3 different pitch
sizes: 2.0mm standard type, 2.5mm high-voltage type and 3.5mm type.
D-1000 Series has gold plated contacts to maintain its high reliability and also tin plated contacts for economical market needs. Customers can choose their own contacts according to specifications, applications and cost.

系列介紹
它是Dynamic系列中,尺寸最小的系列。最適於用作工業設備配套的高可靠性信號線用連接器。連接器的間距,因所使用電流的大小,電壓的差異等,有標準型2.0mm間距,高電壓型
2.5mm間距及分線型3.5mm間距等數值,將來仍將根據市場需求,不斷擴充產品系列。
在保持高可靠性的同時,考慮到性價比,配備鍍錫型。根據工作環境,條件進行採用,有
助於降低成本。
供應商:

Product Features

1.Wide Applicable Wire
From D-1000 series has wide applicable wire range of 30 AWG to 18 AWG with maximum 2.2 mm of outside diameter (D-1200/ D-1500).
Therefore there are no special safety considerations using it in electrical cabinets.

2.Hand Tools are available for all wire sizes.
It can save on delivery lead time and minimize installation tooling costs.
3.Housing and Contact Features
A) Housing products

The D-1000 series consists of D-1100 series
with 2.0mm pitch center line, D-1200 series
with 2.5mm pitch center line. In addition, the
D-1500 series and D-1900 series have a ptich of
3.5mm

B) Contact Products
D-1000 series provide gold plating contact as standard products and also tin plating contact for economical
market needs. Choose contact according to specifications, application, quality level and cost.

4.Other Features (Basic Dynamic series
features)

• Header connector and tab connector have enough length from the tip of contact to top of its housing. To prevent
contact from bending during mating
• D-1000 series are provided with housing lance structure
• Clear identification of circuit number helps with correct wiring
• Metal retention leg on header prevents unwanted movement from cable tension
• Housing lock design avoid wire scratching

產品亮點
1.支持廣泛的線徑規格
它是支持AWG#30〜AWG#18,具有廣泛的線徑電線的外徑最大2.2mmφ(使用
D-1200 / D-1500系列時),可在電氣櫃內安心使用。
2.可換模的壓接工具
標準壓接工具是可換模的。手柄一個,通過更換模具,能夠壓縮供貨期,將使用成本降低在最小
限度。
3.豐富的系列產品線
A)外殼
根據所使用的電線大小,電壓,配備2.0mm間距
的D-1100和2.5mm間距的D-1200系列。數值最
大為40P。
配備有最適於
傳感器信號線的收集,電源的分線等應用的3.5mm間距的D-1500系列。
加上以前的標準顏色黑色,系列還配備彩色版。有助於縮短組裝連接器時的時間
B)端子類
端子的鍍層有鍍金及鍍錫可供選擇。可根據使用用途,環境,成本選擇端子。
4.其他(只有動態系列才有的特點)
〜連接器配合時,殼體間拆分後,端子才開始接觸。因此,它解決了小型連接器常見的端子的壓曲,
折斷等因設計而引起的缺陷。
〜外殼定位銷結構和端子無接觸,故可將操作時對端子的損傷控制在最小限度內。
〜通過標識可見性的電路編號,防止錯誤佈線。
〜線路板連接器上安裝有金屬固定腳,對電纜的搖動,具有充分的強度。
〜外殼鎖定機構,確保插頭和插座的完美結合。


商品規格

無商品規格資料
檔案下載

  • 579AE907-7920-DEB4-8D15-ABBD9884BAD1.pdf
    1
    1
    CHI_DS_1-1773709-2_Dynamic_Series_Catalog_CN_0820.pdf
  • 1A1A031C-758A-2AE4-F9E6-9AF535151F5B.pdf
    2
    2
    CHI_DS_1-1773709-2_Dynamic_Series_Catalog_CN_1908.pdf