回首頁 > 所有商品 > TE > Dynamic Series Connectors > Dynamic D-2000 Series 回上頁
TE (泰科連接器)Dynamic D-2100D Double-row Standard Type 雙排標準型
商品編號:TEC-1-1318119-3
點閱:
9,365

Dynamic系列強固型連接器 Dynamic D-2100D Receptacle housing
Series introduction
The D-2000 series is a compact connector in the Dynamic series and has the specifications for industrial machinery. Its proprietary concept-long contact wiping
length-provides the highreliability which is needed for industrial machinery. The
series also includes themulti-position drawer type not found in any other series
and the hybrid type that integrates signal and power contacts in a single connector.

系列介紹
D-2000在動態系列中屬緊湊型,滿足工業設備配套規格。以擁有有效配合長度的獨有端子,
滿足工業設備的高接觸可靠性要求。同時配備其他系列排除的多位抽抽屜型,信號線與電源線匯集在同一連接器上的混合型。
供應商:

Product Features
1.Terminal and Housing Construction areTwist Resistant
The box shape receptacle contact is highly resistant to twisting and the housing slit also prevents angled mating to increase reliability.
2.Contact Wiping Length
Attaining the reliability needed for industrial machinery in a compact size by using a long contact wiping length.
3.Wire Sizes:
With its 2.5 mm pitch, it is a compact series, yet it can use 18 AWG wires, which are often used in industrial equipment.
4.Audible Latching
Obvious lock sound and feeling when mating means work can be done without mistakes, such as mismating (halfmating), even if the
connection cannot be seen.

5.Keying
The housing is keyed (with a slit), so differentiating between X keys and Y keys prevents mismating. It is also possible to make more key patterns by using keying
plugs.

6.Center Locking
This is the first application of a center lock in Dynamic series. On-board space requirements can be minimized because these connectors
can be mounted in a tight space for highdensity mounting on boards requiring signal lines.

7.Drawer Type
The drawer type connector was developed with a floating construction on one side for applications where it is not possible to see the
connection. There can be up to 50 positions, the highest in the series. These connectors make it possible to make connections
between units with flexibility.

8.Hybrid Type
The D-2600 series combines signal and power contacts in a single connector by using D-2000 contacts as signal contacts and
D-3000 contacts as power ones. This saves on-board space and improves maintenance.

產品亮點

1.抗振動的端子殼體結構
盒形插座和端子的耐振動性高,殼體的插槽防止配合不當,具有高可靠性。
2.有效配合長度
雖為小型,但通過確保有效配合長度的端子,實現工業設備要求的可靠性。
3.適用電線
雖為2.5mm間距的小型系列,但可使用在工業設備行業廣泛使用的AWG18的電線。
4.鎖扣
配合時,清脆的鎖定音和感覺告知作業者,從而在無法目視的作業環境下,也可完成作業,而不會出
現配合不到位(半配合)等缺陷。
5.鍵位
殼體上設有鍵位(插槽),通過區分使用X鍵和Y鍵,防止錯誤配合。如果使用鍵位插塞,可進一步增加鍵的設置。
6.中央鎖方式
Dynamic 2000系列首次採用中央鎖方式。信號線的高密度貼裝到信號線所要求的線路板時,可以在
狹小間距貼裝連接器,故能將線路板佔有面積控制在最小限度。
7.抽屜型
單側具有浮動結構的抽屜型,數值是系列最大的50P。通過使用該連接器,可進行單元間的任意連接。
8.混合型
D-2600系列信號線採用D-2000端子,電源線採用D-3000端子,可使用一個連接器一併配合信號
和電源。有助於減少線路板佔用面積和提高維護保養性。


商品規格

無商品規格資料
檔案下載

  • BE726CB6-EAB8-EA94-B5DE-C875CB7B5D40.pdf
    1
    1
    CHI_DS_1-1773709-2_Dynamic_Series_Catalog_CN_0820.pdf
  • A10D3702-74F7-B764-DD77-8B00AFBF2E46.pdf
    2
    2
    CHI_DS_1-1773709-2_Dynamic_Series_Catalog_CN_1908.pdf