回首頁 > 所有商品 > TE > Dynamic Series Connectors > Dynamic D-3000 Series 回上頁
TE (泰科連接器)D-3100S Single-row Standard 單排標準型
商品編號:TEC-1-178802-3
點閱:
9,351

Dynamic系列強固型連接器 Dynamic D-3100S Tab Housing Panel type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
供應商:
供應商:

Product Features

1. Anti-twist contact structure
An anti-twist contact structure were developed for motor industry which has 3 contact points when mating receptacle
contact with tab contact or header. Concept of 3-contact-points provides high reliability in a real-world environment.

2. Three plating types
3 Plating types are available to meet the customer’s cost, performance requirements and applications. Under a normal
environment with few mating/unmating requirements, tin plating can be used. Where there is a large number of mating/unmating
requirements, then gold plating at 0.38
Ŧm thickness shoud be used. If the environment is deleterious then gold plating at 0.76 Ŧm
thickness can be selected

3. Two types of contact pressure options
2 types of contact pressures are available depending on application: standard Contact pressure for withstanding a large number of
mating/unmating requirements or other extreme environments, and high Contact pressure for vibration prone applications

4. High Current
Despite its small size, it conducts up to 15A (at a maximum temperature rise of 30ʧ ). The latest developed copper alloy adds to the
reliability of the 3-point contact structure

5. Audible Latching
When mating, a dear ’lock' sound and ibration will be felt by the assembler, that can prevent working ‘blind’ mis-mating (or
halfmating) problems

6. Keying
The housing provides a keying (slit), hence mis-matings can be prevented by using the X and Y keys separately. At the same time, the
keying plug can be used to create new key
patterns.

產品亮點

1.抗振動端子結構
採用汽車行業廣泛應用的抗振動的插座和插頭的盒型結構(3點接觸)。它被證明在實際作業環境下能發揮穩定的可靠性的端子結構。
2.三種鍍層
根據使用用途,選擇鍍層的種類,實現了性價比的優化。插拔次數少,通常環境下的用途配備鍍錫,插拔次數多的用途配備鍍金0.38μ m,惡劣環境下配備鍍金0.76μ m。
3.兩種接點壓力
兩種不同接點壓力的端子可供選擇,以適應應用環境,可區分使用,插拔次數多和多位用途使用標準接點壓力件,有振動用途使用高接點壓力件。
4.高電流

該尺寸可承載最大15A(溫升30度以下)電流電。通過新開發的銅合金材料和可靠的3點接觸結構實現。
5.鎖定感
配合時,清脆的鎖定音和振動傳遞給作業員,使得在無法目視的作業環境下,也可放心使用,而不會出現配合不到位(半配合)等缺陷。
6.鍵位
殼體上設有鍵位(插槽),通過區分使用X鍵和Y鍵,防止錯誤配合。若使用鍵位插塞,可進一步提升鍵位功能。


商品規格

無商品規格資料
檔案下載

  • 5A3CC635-96B3-5EB4-F1A5-00EF40429C19.pdf
    1
    1
    CHI_DS_1-1773709-2_Dynamic_Series_Catalog_CN_0820.pdf
  • 5E2F3772-DF33-1574-51A5-E64B624F04C0.pdf
    2
    2
    CHI_DS_1-1773709-2_Dynamic_Series_Catalog_CN_1908.pdf