關於詮能
最新消息
合作品牌
Industrial Machinery
Automation & Control
Intelligent Building
Rail
SOLAR
Relay
Dynamic Series Connectors
Terminal Blocks & Strips
Connectors for Renewable Energy
Test & Measure
Lable
Printers
Tape
Lockout Tagout
Solar DC Cable
Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Photovoltaics
Tools for solar
Thermal Interface Materials
Solar Cable Edge Clip
Solar Junction Box
Solar DC Connector
Solar Junction Box
Solar DC Connector
A Series
Ecomate Aquarius Connector
Ecomate Plastic Connector
Meditec
Automation
Wireless
Extreme
Solar DC Cable
Engineered Systems
Harnesses
Lanyards
Anchorages
Accessories
Connectors
Fall Arrester Blocks
Confined Space
智能節電
決策模擬
專題影片
活動剪影
客戶服務
投資人專區
商品分類
所有商品
TE (277)
所有商品
搜尋到 433 筆符合PV條件的資料
帶保險絲測試導線 XSMF-419
"測試導線帶有高熔斷保險絲，專為1000 V，CAT IV 應用設計，符合IEC/EN61010-031 標準。可以使用Ø 4 mm標準安全探針和測試夾進行帶熔斷保護的測量。裝有保險絲的二段式接頭可以扭開，易於進行保險絲更换。
P VC或硅膠絕缘的高柔軟測試導線，兩端為帶硬質绝缘套管的Ø 4 mm插頭，採用MULTILAM技術。二段式螺纹接頭可以安裝尺寸为6.3 x 32 mm的高熔斷保險絲。
保險絲需另購。
" "The test leads with integrated high breaking capacity fuses are designed for 1000 V, CAT IV in accordance with IEC/EN 61010-031 and allow for the use of Ø 4 mm standard safety probes and test clips for fuse-protected measurements.To change the fuse, the two-part fused connector can be easily unscrewed.
Highly flexible, with insulation in PVC or silicone.With in-line Ø 4 mm MULTILAM plug with rigid insulating sleeve on both ends.The two-part screw connector accepts a high breaking capacity fuse measuring 6.3 x 32 mm.
The fuse is not supplied."
帶保險絲測試導線 XSMF-419
"測試導線帶有高熔斷保險絲，專為1000 V，CAT IV 應用設計，符合IEC/EN61010-031 標準。可以使用Ø 4 mm標準安全探針和測試夾進行帶熔斷保護的測量。裝有保險絲的二段式接頭可以扭開，易於進行保險絲更换。
P VC或硅膠絕缘的高柔軟測試導線，兩端為帶硬質绝缘套管的Ø 4 mm插頭，採用MULTILAM技術。二段式螺纹接頭可以安裝尺寸为6.3 x 32 mm的高熔斷保險絲。
保險絲需另購。"
"The test leads with integrated high breaking capacity fuses are designed for 1000 V, CAT IV in accordance with IEC/EN 61010-031 and allow for the use of Ø 4 mm standard safety probes and test clips for fuse-protected measurements.To change the fuse, the two-part fused connector can be easily unscrewed.
Highly flexible, with insulation in PVC or silicone.With in-line Ø 4 mm MULTILAM plug with rigid insulating sleeve on both ends.The two-part screw connector accepts a high breaking capacity fuse measuring 6.3 x 32 mm.
The fuse is not supplied."
帶保險絲測試導線 XSMF-419
"測試導線帶有高熔斷保險絲，專為1000 V，CAT IV 應用設計，符合IEC/EN61010-031 標準。可以使用Ø 4 mm標準安全探針和測試夾進行帶熔斷保護的測量。裝有保險絲的二段式接頭可以扭開，易於進行保險絲更换。
P VC或硅膠絕缘的高柔軟測試導線，兩端為帶硬質绝缘套管的Ø 4 mm插頭，採用MULTILAM技術。二段式螺纹接頭可以安裝尺寸为6.3 x 32 mm的高熔斷保險絲。
保險絲需另購。"
"The test leads with integrated high breaking capacity fuses are designed for 1000 V, CAT IV in accordance with IEC/EN 61010-031 and allow for the use of Ø 4 mm standard safety probes and test clips for fuse-protected measurements.To change the fuse, the two-part fused connector can be easily unscrewed.
Highly flexible, with insulation in PVC or silicone.With in-line Ø 4 mm MULTILAM plug with rigid insulating sleeve on both ends.The two-part screw connector accepts a high breaking capacity fuse measuring 6.3 x 32 mm.
The fuse is not supplied."
帶保險絲測試導線 XSMF-419
"測試導線帶有高熔斷保險絲，專為1000 V，CAT IV 應用設計，符合IEC/EN61010-031 標準。可以使用Ø 4 mm標準安全探針和測試夾進行帶熔斷保護的測量。裝有保險絲的二段式接頭可以扭開，易於進行保險絲更换。
P VC或硅膠絕缘的高柔軟測試導線，兩端為帶硬質绝缘套管的Ø 4 mm插頭，採用MULTILAM技術。二段式螺纹接頭可以安裝尺寸为6.3 x 32 mm的高熔斷保險絲。
保險絲需另購。"
"The test leads with integrated high breaking capacity fuses are designed for 1000 V, CAT IV in accordance with IEC/EN 61010-031 and allow for the use of Ø 4 mm standard safety probes and test clips for fuse-protected measurements.To change the fuse, the two-part fused connector can be easily unscrewed.
Highly flexible, with insulation in PVC or silicone.With in-line Ø 4 mm MULTILAM plug with rigid insulating sleeve on both ends.The two-part screw connector accepts a high breaking capacity fuse measuring 6.3 x 32 mm.
The fuse is not supplied."
帶保險絲測試導線 XSMF-419
"測試導線帶有高熔斷保險絲，專為1000 V，CAT IV 應用設計，符合IEC/EN61010-031 標準。可以使用Ø 4 mm標準安全探針和測試夾進行帶熔斷保護的測量。裝有保險絲的二段式接頭可以扭開，易於進行保險絲更换。
P VC或硅膠絕缘的高柔軟測試導線，兩端為帶硬質绝缘套管的Ø 4 mm插頭，採用MULTILAM技術。二段式螺纹接頭可以安裝尺寸为6.3 x 32 mm的高熔斷保險絲。
保險絲需另購。"
"The test leads with integrated high breaking capacity fuses are designed for 1000 V, CAT IV in accordance with IEC/EN 61010-031 and allow for the use of Ø 4 mm standard safety probes and test clips for fuse-protected measurements.To change the fuse, the two-part fused connector can be easily unscrewed.
Highly flexible, with insulation in PVC or silicone.With in-line Ø 4 mm MULTILAM plug with rigid insulating sleeve on both ends.The two-part screw connector accepts a high breaking capacity fuse measuring 6.3 x 32 mm.
The fuse is not supplied."
帶保險絲測試導線 XSMF-419
"測試導線帶有高熔斷保險絲，專為1000 V，CAT IV 應用設計，符合IEC/EN61010-031 標準。可以使用Ø 4 mm標準安全探針和測試夾進行帶熔斷保護的測量。裝有保險絲的二段式接頭可以扭開，易於進行保險絲更换。
P VC或硅膠絕缘的高柔軟測試導線，兩端為帶硬質绝缘套管的Ø 4 mm插頭，採用MULTILAM技術。二段式螺纹接頭可以安裝尺寸为6.3 x 32 mm的高熔斷保險絲。
保險絲需另購。"
"The test leads with integrated high breaking capacity fuses are designed for 1000 V, CAT IV in accordance with IEC/EN 61010-031 and allow for the use of Ø 4 mm standard safety probes and test clips for fuse-protected measurements.To change the fuse, the two-part fused connector can be easily unscrewed.
Highly flexible, with insulation in PVC or silicone.With in-line Ø 4 mm MULTILAM plug with rigid insulating sleeve on both ends.The two-part screw connector accepts a high breaking capacity fuse measuring 6.3 x 32 mm.
The fuse is not supplied."
帶保險絲測試導線 XSMF-419
"測試導線帶有高熔斷保險絲，專為1000 V，CAT IV 應用設計，符合IEC/EN61010-031 標準。可以使用Ø 4 mm標準安全探針和測試夾進行帶熔斷保護的測量。裝有保險絲的二段式接頭可以扭開，易於進行保險絲更换。
P VC或硅膠絕缘的高柔軟測試導線，兩端為帶硬質绝缘套管的Ø 4 mm插頭，採用MULTILAM技術。二段式螺纹接頭可以安裝尺寸为6.3 x 32 mm的高熔斷保險絲。
保險絲需另購。"
"The test leads with integrated high breaking capacity fuses are designed for 1000 V, CAT IV in accordance with IEC/EN 61010-031 and allow for the use of Ø 4 mm standard safety probes and test clips for fuse-protected measurements.To change the fuse, the two-part fused connector can be easily unscrewed.
Highly flexible, with insulation in PVC or silicone.With in-line Ø 4 mm MULTILAM plug with rigid insulating sleeve on both ends.The two-part screw connector accepts a high breaking capacity fuse measuring 6.3 x 32 mm.
The fuse is not supplied."
帶保險絲測試導線 XSMF-419
"測試導線帶有高熔斷保險絲，專為1000 V，CAT IV 應用設計，符合IEC/EN61010-031 標準。可以使用Ø 4 mm標準安全探針和測試夾進行帶熔斷保護的測量。裝有保險絲的二段式接頭可以扭開，易於進行保險絲更换。
P VC或硅膠絕缘的高柔軟測試導線，兩端為帶硬質绝缘套管的Ø 4 mm插頭，採用MULTILAM技術。二段式螺纹接頭可以安裝尺寸为6.3 x 32 mm的高熔斷保險絲。
保險絲需另購。"
"The test leads with integrated high breaking capacity fuses are designed for 1000 V, CAT IV in accordance with IEC/EN 61010-031 and allow for the use of Ø 4 mm standard safety probes and test clips for fuse-protected measurements.To change the fuse, the two-part fused connector can be easily unscrewed.
Highly flexible, with insulation in PVC or silicone.With in-line Ø 4 mm MULTILAM plug with rigid insulating sleeve on both ends.The two-part screw connector accepts a high breaking capacity fuse measuring 6.3 x 32 mm.
The fuse is not supplied."
帶保險絲測試導線 XSMF-419
"測試導線帶有高熔斷保險絲，專為1000 V，CAT IV 應用設計，符合IEC/EN61010-031 標準。可以使用Ø 4 mm標準安全探針和測試夾進行帶熔斷保護的測量。裝有保險絲的二段式接頭可以扭開，易於進行保險絲更换。
P VC或硅膠絕缘的高柔軟測試導線，兩端為帶硬質绝缘套管的Ø 4 mm插頭，採用MULTILAM技術。二段式螺纹接頭可以安裝尺寸为6.3 x 32 mm的高熔斷保險絲。
保險絲需另購。"
"The test leads with integrated high breaking capacity fuses are designed for 1000 V, CAT IV in accordance with IEC/EN 61010-031 and allow for the use of Ø 4 mm standard safety probes and test clips for fuse-protected measurements.To change the fuse, the two-part fused connector can be easily unscrewed.
Highly flexible, with insulation in PVC or silicone.With in-line Ø 4 mm MULTILAM plug with rigid insulating sleeve on both ends.The two-part screw connector accepts a high breaking capacity fuse measuring 6.3 x 32 mm.
The fuse is not supplied."
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Glass-Glass Edge Mount Application with Flap
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
SOLARLOK PV EDGE分散式接線盒 Traditional Mid-Panel Application or Half-Cell Application
SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box
Insulation Stripper for Solar Applications with shaped blades
Unlike other strippers, that only cut insulation partially and tear the rest, this Rennsteig stripper cuts the insulation around the entire circumference of the wire and then pulls it gently off the end. There is never any damage to the leads. Replaceable stripping blades let you configure the stripper to your needs. When the blades wear out, you can replace them without buying a new stripper - for significant savings.

■ Special hand tool for high-quality stripping and dismantling of single- and multi-wire cable
■ With an adjustable length stop
■ No pinching of deforming of cable ends by a special cutting mode
■ Form-fit stripping also of difficult-to-remove insulating materials
■ Customized blade designs on request
■ Automatic release after operation
■ Repetitive work due to adjustable length stop
■ Solid construction, easy to handle
■ Ergonomically designed two-component handles
Professional Solar Wiring/Crimping Kit for MC3/MC4/Tlian/Tyco/Leoni (14/12/10/8 AWG solar contacts)
■ For cutting, stripping and crimping of solar contacts from MC3/MC4/Tlian/Tyco/Leoni
■ The Kit includes:
• Insulation stripper for solar wire (AWG 16/14/12/10)
• Cable cutter (Max. wire cross-section: 50 SQ-MM)
• Solar system tool with different die sets
• For MC4 (4/6/10 SQ-MM | similar to 12/10/8 AWG) + Tlian (4/6 mm2 | similar to
12/10 AWG) + Leoni LSC-R1
• MC3 (4/6/10 SQ-MM | similar to 12/10/8 AWG)
• TE (1.5/2.5/4/6 SQ-MM | similar to 14/12/10/8 AWG)

■ A customized kit is much less expensive than multiple individual tools
■ Kits for other applications on request

With this kit you will also be able to make adapters that go from one type of connector system to another.
Surge voltage arrester, Low voltage, 1100 V, 40 kA, VPU PV II 3 1000
The priority you give to overvoltage protection depends
on your willingness to take risks! Perhaps you think
"it’ll never happen to me". Then you won’t have lost
anything, but will have gained only very little. However,
the subject of overvoltage is then a daily worry for you.
But if you wish to be on the safe side, you should include
overvoltage protection in your corporate strategy. You will
profit from such an investment in operational safety and
can prevent a disaster with Weidmüller's surge protection
for power, signal and data.

系列中的裝置是一種雷電和浪湧保護裝置。它保護光伏系統
頂部因大氣放電（暴雨）或開關操作引發的雷電和過壓的影
響。裝置必需根據IEC 60364-7-712 / EN 50539-12安裝在
光伏系統中。
Surge voltage arrester, Low voltage, 1500 V, 30 kA, VPU PV II 3 1500
The priority you give to overvoltage protection depends
on your willingness to take risks! Perhaps you think
"it’ll never happen to me". Then you won’t have lost
anything, but will have gained only very little. However,
the subject of overvoltage is then a daily worry for you.
But if you wish to be on the safe side, you should include
overvoltage protection in your corporate strategy. You will
profit from such an investment in operational safety and
can prevent a disaster with Weidmüller's surge protection
for power, signal and data.

系列中的裝置是一種雷電和浪湧保護裝置。它保護光伏系統
頂部因大氣放電（暴雨）或開關操作引發的雷電和過壓的影
響。裝置必需根據IEC 60364-7-712 / EN 50539-12安裝在
光伏系統中。
Surge voltage arrester, Low voltage, 1100 V, with remote contact, 40 kA, VPU PV II 3 R 1000
The priority you give to overvoltage protection depends
on your willingness to take risks! Perhaps you think
"it’ll never happen to me". Then you won’t have lost
anything, but will have gained only very little. However,
the subject of overvoltage is then a daily worry for you.
But if you wish to be on the safe side, you should include
overvoltage protection in your corporate strategy. You will
profit from such an investment in operational safety and
can prevent a disaster with Weidmüller's surge protection
for power, signal and data.

系列中的裝置是一種雷電和浪湧保護裝置。它保護光伏系統
頂部因大氣放電（暴雨）或開關操作引發的雷電和過壓的影
響。裝置必需根據IEC 60364-7-712 / EN 50539-12安裝在
光伏系統中。
Surge voltage arrester, Low voltage, 1500 V, with remote contact, 30 kA, VPU PV II 3 R 1500
The priority you give to overvoltage protection depends
on your willingness to take risks! Perhaps you think
"it’ll never happen to me". Then you won’t have lost
anything, but will have gained only very little. However,
the subject of overvoltage is then a daily worry for you.
But if you wish to be on the safe side, you should include
overvoltage protection in your corporate strategy. You will
profit from such an investment in operational safety and
can prevent a disaster with Weidmüller's surge protection
for power, signal and data.

系列中的裝置是一種雷電和浪湧保護裝置。它保護光伏系統
頂部因大氣放電（暴雨）或開關操作引發的雷電和過壓的影
響。裝置必需根據IEC 60364-7-712 / EN 50539-12安裝在
光伏系統中。
光伏型, 匯流箱, 1000 V, 1 MPPT, 每個 MPPT 3 個輸入 / 3 個輸出, 附有保險絲支架, Surge protection I / II, 開關分離器, WM4C
PV Next – combiner boxes of a new generation
With PV Next, Weidmüller offers the world's first combiner box concept based on a standardised printed circuit board design. The advantages: simplicity, safety, time savings, and cost reduction. The innovative concept covers approximately 75 % of today's standard requirements, enabling PV installers to work faster and more cost-effectively. The integrated PUSH IN technology reduces assembly times and minimises the risk of errors and the resulting consequences.

PV Next –新一代匯流箱
借助PV Next，魏德米勒提供了世界上第一個基於標準化印刷電路板設計的匯流箱概念。優點：簡單，安全，節省時間和降低成本。創新概念涵蓋了當今標準要求的約75％，使光伏安裝人員能夠更快，更經濟地工作。集成的PUSH IN技術減少了組裝時間，並最大程度地降低了發生錯誤和後果的風險。
光伏型, 匯流箱, 1000 V, 1 MPPT, 每個 MPPT 3 個輸入 / 3 個輸出, 附有保險絲支架, Surge protection I / II, WM4C
PV Next – combiner boxes of a new generation
With PV Next, Weidmüller offers the world's first combiner box concept based on a standardised printed circuit board design. The advantages: simplicity, safety, time savings, and cost reduction. The innovative concept covers approximately 75 % of today's standard requirements, enabling PV installers to work faster and more cost-effectively. The integrated PUSH IN technology reduces assembly times and minimises the risk of errors and the resulting consequences.

PV Next –新一代匯流箱
借助PV Next，魏德米勒提供了世界上第一個基於標準化印刷電路板設計的匯流箱概念。優點：簡單，安全，節省時間和降低成本。創新概念涵蓋了當今標準要求的約75％，使光伏安裝人員能夠更快，更經濟地工作。集成的PUSH IN技術減少了組裝時間，並最大程度地降低了發生錯誤和後果的風險。
光伏型, 匯流箱, 1000 V, 2 MPPT, 每個 MPPT 3 個輸入 / 3 個輸出, 附有保險絲支架, Surge protection I / II, 開關分離器, WM4C
PV Next – combiner boxes of a new generation
With PV Next, Weidmüller offers the world's first combiner box concept based on a standardised printed circuit board design. The advantages: simplicity, safety, time savings, and cost reduction. The innovative concept covers approximately 75 % of today's standard requirements, enabling PV installers to work faster and more cost-effectively. The integrated PUSH IN technology reduces assembly times and minimises the risk of errors and the resulting consequences.

PV Next –新一代匯流箱
借助PV Next，魏德米勒提供了世界上第一個基於標準化印刷電路板設計的匯流箱概念。優點：簡單，安全，節省時間和降低成本。創新概念涵蓋了當今標準要求的約75％，使光伏安裝人員能夠更快，更經濟地工作。集成的PUSH IN技術減少了組裝時間，並最大程度地降低了發生錯誤和後果的風險。
光伏型, 匯流箱, 1000 V, 1 MPPT, 每個 MPPT 3 個輸入 / 3 個輸出, Surge protection I / II, 開關分離器, WM4C
PV Next – combiner boxes of a new generation
With PV Next, Weidmüller offers the world's first combiner box concept based on a standardised printed circuit board design. The advantages: simplicity, safety, time savings, and cost reduction. The innovative concept covers approximately 75 % of today's standard requirements, enabling PV installers to work faster and more cost-effectively. The integrated PUSH IN technology reduces assembly times and minimises the risk of errors and the resulting consequences.

PV Next –新一代匯流箱
借助PV Next，魏德米勒提供了世界上第一個基於標準化印刷電路板設計的匯流箱概念。優點：簡單，安全，節省時間和降低成本。創新概念涵蓋了當今標準要求的約75％，使光伏安裝人員能夠更快，更經濟地工作。集成的PUSH IN技術減少了組裝時間，並最大程度地降低了發生錯誤和後果的風險。
光伏型, 匯流箱, 1000 V, 1 MPPT, 每個 MPPT 3 個輸入 / 3 個輸出, Surge protection I / II, WM4C
PV Next – combiner boxes of a new generation
With PV Next, Weidmüller offers the world's first combiner box concept based on a standardised printed circuit board design. The advantages: simplicity, safety, time savings, and cost reduction. The innovative concept covers approximately 75 % of today's standard requirements, enabling PV installers to work faster and more cost-effectively. The integrated PUSH IN technology reduces assembly times and minimises the risk of errors and the resulting consequences.

PV Next –新一代匯流箱
借助PV Next，魏德米勒提供了世界上第一個基於標準化印刷電路板設計的匯流箱概念。優點：簡單，安全，節省時間和降低成本。創新概念涵蓋了當今標準要求的約75％，使光伏安裝人員能夠更快，更經濟地工作。集成的PUSH IN技術減少了組裝時間，並最大程度地降低了發生錯誤和後果的風險。
光伏型, 匯流箱, 1000 V, 2 MPPT, 每個 MPPT 3 個輸入 / 3 個輸出, Surge protection I / II, 開關分離器, WM4C
PV Next – combiner boxes of a new generation
With PV Next, Weidmüller offers the world's first combiner box concept based on a standardised printed circuit board design. The advantages: simplicity, safety, time savings, and cost reduction. The innovative concept covers approximately 75 % of today's standard requirements, enabling PV installers to work faster and more cost-effectively. The integrated PUSH IN technology reduces assembly times and minimises the risk of errors and the resulting consequences.

PV Next –新一代匯流箱
借助PV Next，魏德米勒提供了世界上第一個基於標準化印刷電路板設計的匯流箱概念。優點：簡單，安全，節省時間和降低成本。創新概念涵蓋了當今標準要求的約75％，使光伏安裝人員能夠更快，更經濟地工作。集成的PUSH IN技術減少了組裝時間，並最大程度地降低了發生錯誤和後果的風險。
光伏型, 匯流箱, 1000 V, 2 MPPT, 每個 MPPT 3 個輸入 / 3 個輸出, Surge protection I / II, WM4C
PV Next – combiner boxes of a new generation
With PV Next, Weidmüller offers the world's first combiner box concept based on a standardised printed circuit board design. The advantages: simplicity, safety, time savings, and cost reduction. The innovative concept covers approximately 75 % of today's standard requirements, enabling PV installers to work faster and more cost-effectively. The integrated PUSH IN technology reduces assembly times and minimises the risk of errors and the resulting consequences.

PV Next –新一代匯流箱
借助PV Next，魏德米勒提供了世界上第一個基於標準化印刷電路板設計的匯流箱概念。優點：簡單，安全，節省時間和降低成本。創新概念涵蓋了當今標準要求的約75％，使光伏安裝人員能夠更快，更經濟地工作。集成的PUSH IN技術減少了組裝時間，並最大程度地降低了發生錯誤和後果的風險。
光伏型, 匯流箱, 1000 V, 3 MPPT, 每個 MPPT 3 個輸入 / 3 個輸出, Surge protection I / II, WM4C
PV Next – combiner boxes of a new generation
With PV Next, Weidmüller offers the world's first combiner box concept based on a standardised printed circuit board design. The advantages: simplicity, safety, time savings, and cost reduction. The innovative concept covers approximately 75 % of today's standard requirements, enabling PV installers to work faster and more cost-effectively. The integrated PUSH IN technology reduces assembly times and minimises the risk of errors and the resulting consequences.

PV Next –新一代匯流箱
借助PV Next，魏德米勒提供了世界上第一個基於標準化印刷電路板設計的匯流箱概念。優點：簡單，安全，節省時間和降低成本。創新概念涵蓋了當今標準要求的約75％，使光伏安裝人員能夠更快，更經濟地工作。集成的PUSH IN技術減少了組裝時間，並最大程度地降低了發生錯誤和後果的風險。
光伏型, 組裝接線盒, Junction Box, 掛牆式接線盒, 附有保險絲支架, 電湧保護器 II, 用於壁式安裝, 開關分離器, WM4C, 電流監控
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。
光伏型, 組裝接線盒, Junction Box, 掛牆式接線盒, 附有保險絲支架, 電湧保護器 II, 用於壁式安裝, 開關分離器, WM4C
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。
光伏型, 組裝接線盒, Junction Box, 掛牆式接線盒, 電流監控, 附有保險絲支架, 電湧保護器 II, 電纜接頭, 用於壁式安裝, 開關分離器, 電流監控
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。
光伏型，組合外殼，接線盒，壁裝接線盒，電流監控，帶保險絲座，電湧保護II，電纜密封套，用於牆壁安裝，隔離開關，電流監控
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。
光伏型, 組裝接線盒, Junction Box, 掛牆式接線盒, 附有保險絲支架, 電湧保護器 II, 電纜接頭, 用於壁式安裝, 開關分離器
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。
光伏型, 組裝接線盒, Junction Box, 掛牆式接線盒, 附有保險絲支架, 電湧保護器 II, 電纜接頭, 用於壁式安裝, 開關分離器
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。
光伏型, 組裝接線盒, Junction Box, 掛牆式接線盒, 附有保險絲支架, 電湧保護器 II, 電纜接頭, 用於壁式安裝, 開關分離器
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。
光伏型, 組裝接線盒, Junction Box, 掛牆式接線盒, 附有保險絲支架, 電湧保護器 II, 電纜接頭, 用於壁式安裝, 開關分離器
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。
光伏型, 組裝接線盒, Junction Box, 掛牆式接線盒, 附有保險絲支架, 電湧保護器 II, 電纜接頭, 用於壁式安裝, 開關分離器
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。
光伏型, 組裝接線盒, Junction Box, 掛牆式接線盒, 附有保險絲支架, 電湧保護器 II, 電纜接頭, 用於壁式安裝, 開關分離器
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。
光伏型, 組裝接線盒, Junction Box, 掛牆式接線盒, 附有保險絲支架, 電湧保護器 II, 電纜接頭, 用於壁式安裝, 開關分離器
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。
光伏型, 組裝接線盒, Junction Box, 掛牆式接線盒, 附有保險絲支架, 電湧保護器 II, 用於壁式安裝, 開關分離器, WM4C, 電流監控
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。
光伏型, 組裝接線盒, Junction Box, 掛牆式接線盒, 附有保險絲支架, 電湧保護器 II, 用於壁式安裝, 開關分離器, WM4C
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。
光伏型, 組裝接線盒, Junction Box, 掛牆式接線盒, 電流監控, 附有保險絲支架, 電湧保護器 II, 電纜接頭, 用於壁式安裝, 開關分離器, 電流監控
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。
光伏型, 組裝接線盒, Junction Box, 掛牆式接線盒, 附有保險絲支架, 電湧保護器 II, 電纜接頭, 用於壁式安裝, 開關分離器
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。
光伏型, 組裝接線盒, Junction Box, 掛牆式接線盒, 附有保險絲支架, 電湧保護器 II, 電纜接頭, 用於壁式安裝, 開關分離器
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。
光伏型, 組裝接線盒, Junction Box, 掛牆式接線盒, 附有保險絲支架, 電湧保護器 II, 電纜接頭, 用於壁式安裝, 開關分離器
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。
光伏型, 組裝接線盒, Junction Box, 掛牆式接線盒, 電流監控, 附有保險絲支架, 電湧保護器 II, 電纜接頭, 用於壁式安裝, 開關分離器, 電流監控
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。
Weidmüller太陽能直流電網級匯流箱 PV 224S0F1C15V0O3TXPX15PWW
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。
光伏型, 組裝接線盒, Junction Box, 掛牆式接線盒, 附有保險絲支架, 電湧保護器 II, 用於壁式安裝, 開關分離器, WM4C, 電流監控
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。
光伏型, 組裝接線盒, Junction Box, 掛牆式接線盒, 電流監控, 附有保險絲支架, 電湧保護器 II, 電纜接頭, 用於壁式安裝, 開關分離器, 電流監控
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。
光伏型, 組裝接線盒, Junction Box, 掛牆式接線盒, 附有保險絲支架, 電湧保護器 II, 電纜接頭, 用於壁式安裝, 開關分離器
Ready-to-connect generator combiner boxes

The perfect solution for every customer's needs

Fitted between the solar modules and the inverter, the generator combiner boxes bring together the electricity that has been generated. Weidmüller has developed many standard configurations of generator combiner boxes based upon recurring customer requirements. These provide an optimal connection system, and also protection and monitoring systems.
The product range includes solutions for use in roof-mounted systems and large solar farms.
Depending on the version, the boxes can contain terminal blocks, surge protection, fuses and load circuit breakers and even systems that permanently monitor the performance of the strings.

即接即用的發電匯流箱

設計完美，滿足每個客戶需求

發電匯流箱安裝在太陽能模塊和逆變器之間，將產生的電流匯合在一起。魏德米勒根據客戶要求，開發了多種標準配置的發電匯流箱。提供最佳聯接系統、保護和監控系統。
包括用於屋頂系統和大型太陽能發電場中的產品方案。
根據不同規格，匯流箱中可以配置接線端子、電湧保護器、熔斷器和斷路器甚至永久監控組串性能的系統。