商品分類

所有商品

Dynamic系列強固型連接器 Dynamic D-2970 Series Female Push-in Plug
TE Connectivity D-2970 Dynamic Series PCB Connectors

TE Connectivity's D-2970 Dynamic Series PCB Connectors are compact 5mm-pitch wire-to-board PCB connectors with field-installable, time-saving push-in clamp terminations. The push-in clamp and the center-locking lever do not require tooling. This trims mating time by up to 90% compared with connectors using screw-latch locking systems. The center-locking lever also offers audible and tactile mating feedback to ensure safe mating, while a lower insertion force allows users to release the wires without injuring their fingertips. An IP20 "finger-safe" housing also prevents unintended operator contact with live components.

TE Connectivity's D-2970 Dynamic Series PCB Connectors are offered in configurations with three or four positions. Three angled male headers are available, and all designs of the male header mate with the same female plug for design flexibility.

The D-2970 Series operates at up to 20A and 400V at a typical ambient application temperature of 55°C without further derating. The connector contacts support shock- and vibration-exposed applications, making them ideal for industrial machinery, automation and control, and building automation.

TE Con​​nectivity D-2970動態系列PCB連接器

TE Con​​nectivity的D-2970動態系列PCB連接器是緊湊的5mm間距線對板PCB連接器,具有可現場安裝的省時推入式接線端子。推入式夾具和中心鎖定桿不需要工具。與使用螺絲鎖閂系統的連接器相比,這可將配對時間縮短多達90%。中心鎖定桿還提供可聽和可觸知的配合反饋,以確保安全地配合,同時較低的插入力使用戶可以釋放電線而不會傷及指尖。 IP20“手指安全”外殼還可以防止操作員意外接觸帶電組件。

TE Con​​nectivity的D-2970動態系列PCB連接器提供三個或四個位置的配置。提供了三個傾斜的公頭連接器,公頭連接器的所有設計都與相同的母頭插頭匹配,以實現設計靈活性。

D-2970系列在55°C的典型環境應用溫度下可在高達20A和400V的電壓下運行,而無需進一步降額。連接器觸點支持受到衝擊和振動的應用,使其非常適合工業機械,自動化和控制以及樓宇自動化。
Dynamic系列強固型連接器 Dynamic D-2970 Series Female Push-in Plug
TE Connectivity D-2970 Dynamic Series PCB Connectors

TE Connectivity's D-2970 Dynamic Series PCB Connectors are compact 5mm-pitch wire-to-board PCB connectors with field-installable, time-saving push-in clamp terminations. The push-in clamp and the center-locking lever do not require tooling. This trims mating time by up to 90% compared with connectors using screw-latch locking systems. The center-locking lever also offers audible and tactile mating feedback to ensure safe mating, while a lower insertion force allows users to release the wires without injuring their fingertips. An IP20 "finger-safe" housing also prevents unintended operator contact with live components.

TE Connectivity's D-2970 Dynamic Series PCB Connectors are offered in configurations with three or four positions. Three angled male headers are available, and all designs of the male header mate with the same female plug for design flexibility.

The D-2970 Series operates at up to 20A and 400V at a typical ambient application temperature of 55°C without further derating. The connector contacts support shock- and vibration-exposed applications, making them ideal for industrial machinery, automation and control, and building automation.

TE Con​​nectivity D-2970動態系列PCB連接器

TE Con​​nectivity的D-2970動態系列PCB連接器是緊湊的5mm間距線對板PCB連接器,具有可現場安裝的省時推入式接線端子。推入式夾具和中心鎖定桿不需要工具。與使用螺絲鎖閂系統的連接器相比,這可將配對時間縮短多達90%。中心鎖定桿還提供可聽和可觸知的配合反饋,以確保安全地配合,同時較低的插入力使用戶可以釋放電線而不會傷及指尖。 IP20“手指安全”外殼還可以防止操作員意外接觸帶電組件。

TE Con​​nectivity的D-2970動態系列PCB連接器提供三個或四個位置的配置。提供了三個傾斜的公頭連接器,公頭連接器的所有設計都與相同的母頭插頭匹配,以實現設計靈活性。

D-2970系列在55°C的典型環境應用溫度下可在高達20A和400V的電壓下運行,而無需進一步降額。連接器觸點支持受到衝擊和振動的應用,使其非常適合工業機械,自動化和控制以及樓宇自動化。
Dynamic系列強固型連接器 Dynamic D-2970 Series 90° THR Male Header
TE Connectivity D-2970 Dynamic Series PCB Connectors

TE Connectivity's D-2970 Dynamic Series PCB Connectors are compact 5mm-pitch wire-to-board PCB connectors with field-installable, time-saving push-in clamp terminations. The push-in clamp and the center-locking lever do not require tooling. This trims mating time by up to 90% compared with connectors using screw-latch locking systems. The center-locking lever also offers audible and tactile mating feedback to ensure safe mating, while a lower insertion force allows users to release the wires without injuring their fingertips. An IP20 "finger-safe" housing also prevents unintended operator contact with live components.

TE Connectivity's D-2970 Dynamic Series PCB Connectors are offered in configurations with three or four positions. Three angled male headers are available, and all designs of the male header mate with the same female plug for design flexibility.

The D-2970 Series operates at up to 20A and 400V at a typical ambient application temperature of 55°C without further derating. The connector contacts support shock- and vibration-exposed applications, making them ideal for industrial machinery, automation and control, and building automation.

TE Con​​nectivity D-2970動態系列PCB連接器

TE Con​​nectivity的D-2970動態系列PCB連接器是緊湊的5mm間距線對板PCB連接器,具有可現場安裝的省時推入式接線端子。推入式夾具和中心鎖定桿不需要工具。與使用螺絲鎖閂系統的連接器相比,這可將配對時間縮短多達90%。中心鎖定桿還提供可聽和可觸知的配合反饋,以確保安全地配合,同時較低的插入力使用戶可以釋放電線而不會傷及指尖。 IP20“手指安全”外殼還可以防止操作員意外接觸帶電組件。

TE Con​​nectivity的D-2970動態系列PCB連接器提供三個或四個位置的配置。提供了三個傾斜的公頭連接器,公頭連接器的所有設計都與相同的母頭插頭匹配,以實現設計靈活性。

D-2970系列在55°C的典型環境應用溫度下可在高達20A和400V的電壓下運行,而無需進一步降額。連接器觸點支持受到衝擊和振動的應用,使其非常適合工業機械,自動化和控制以及樓宇自動化。
Dynamic系列強固型連接器 Dynamic D-2970 Series 90° THR Male Header
TE Connectivity D-2970 Dynamic Series PCB Connectors

TE Connectivity's D-2970 Dynamic Series PCB Connectors are compact 5mm-pitch wire-to-board PCB connectors with field-installable, time-saving push-in clamp terminations. The push-in clamp and the center-locking lever do not require tooling. This trims mating time by up to 90% compared with connectors using screw-latch locking systems. The center-locking lever also offers audible and tactile mating feedback to ensure safe mating, while a lower insertion force allows users to release the wires without injuring their fingertips. An IP20 "finger-safe" housing also prevents unintended operator contact with live components.

TE Connectivity's D-2970 Dynamic Series PCB Connectors are offered in configurations with three or four positions. Three angled male headers are available, and all designs of the male header mate with the same female plug for design flexibility.

The D-2970 Series operates at up to 20A and 400V at a typical ambient application temperature of 55°C without further derating. The connector contacts support shock- and vibration-exposed applications, making them ideal for industrial machinery, automation and control, and building automation.

TE Con​​nectivity D-2970動態系列PCB連接器

TE Con​​nectivity的D-2970動態系列PCB連接器是緊湊的5mm間距線對板PCB連接器,具有可現場安裝的省時推入式接線端子。推入式夾具和中心鎖定桿不需要工具。與使用螺絲鎖閂系統的連接器相比,這可將配對時間縮短多達90%。中心鎖定桿還提供可聽和可觸知的配合反饋,以確保安全地配合,同時較低的插入力使用戶可以釋放電線而不會傷及指尖。 IP20“手指安全”外殼還可以防止操作員意外接觸帶電組件。

TE Con​​nectivity的D-2970動態系列PCB連接器提供三個或四個位置的配置。提供了三個傾斜的公頭連接器,公頭連接器的所有設計都與相同的母頭插頭匹配,以實現設計靈活性。

D-2970系列在55°C的典型環境應用溫度下可在高達20A和400V的電壓下運行,而無需進一步降額。連接器觸點支持受到衝擊和振動的應用,使其非常適合工業機械,自動化和控制以及樓宇自動化。
Dynamic系列強固型連接器 Dynamic 180° THR Male Header
TE Connectivity D-2970 Dynamic Series PCB Connectors

TE Connectivity's D-2970 Dynamic Series PCB Connectors are compact 5mm-pitch wire-to-board PCB connectors with field-installable, time-saving push-in clamp terminations. The push-in clamp and the center-locking lever do not require tooling. This trims mating time by up to 90% compared with connectors using screw-latch locking systems. The center-locking lever also offers audible and tactile mating feedback to ensure safe mating, while a lower insertion force allows users to release the wires without injuring their fingertips. An IP20 "finger-safe" housing also prevents unintended operator contact with live components.

TE Connectivity's D-2970 Dynamic Series PCB Connectors are offered in configurations with three or four positions. Three angled male headers are available, and all designs of the male header mate with the same female plug for design flexibility.

The D-2970 Series operates at up to 20A and 400V at a typical ambient application temperature of 55°C without further derating. The connector contacts support shock- and vibration-exposed applications, making them ideal for industrial machinery, automation and control, and building automation.

TE Con​​nectivity D-2970動態系列PCB連接器

TE Con​​nectivity的D-2970動態系列PCB連接器是緊湊的5mm間距線對板PCB連接器,具有可現場安裝的省時推入式接線端子。推入式夾具和中心鎖定桿不需要工具。與使用螺絲鎖閂系統的連接器相比,這可將配對時間縮短多達90%。中心鎖定桿還提供可聽和可觸知的配合反饋,以確保安全地配合,同時較低的插入力使用戶可以釋放電線而不會傷及指尖。 IP20“手指安全”外殼還可以防止操作員意外接觸帶電組件。

TE Con​​nectivity的D-2970動態系列PCB連接器提供三個或四個位置的配置。提供了三個傾斜的公頭連接器,公頭連接器的所有設計都與相同的母頭插頭匹配,以實現設計靈活性。

D-2970系列在55°C的典型環境應用溫度下可在高達20A和400V的電壓下運行,而無需進一步降額。連接器觸點支持受到衝擊和振動的應用,使其非常適合工業機械,自動化和控制以及樓宇自動化。
Dynamic系列強固型連接器 180° THR Male Header
TE Connectivity D-2970 Dynamic Series PCB Connectors

TE Connectivity's D-2970 Dynamic Series PCB Connectors are compact 5mm-pitch wire-to-board PCB connectors with field-installable, time-saving push-in clamp terminations. The push-in clamp and the center-locking lever do not require tooling. This trims mating time by up to 90% compared with connectors using screw-latch locking systems. The center-locking lever also offers audible and tactile mating feedback to ensure safe mating, while a lower insertion force allows users to release the wires without injuring their fingertips. An IP20 "finger-safe" housing also prevents unintended operator contact with live components.

TE Connectivity's D-2970 Dynamic Series PCB Connectors are offered in configurations with three or four positions. Three angled male headers are available, and all designs of the male header mate with the same female plug for design flexibility.

The D-2970 Series operates at up to 20A and 400V at a typical ambient application temperature of 55°C without further derating. The connector contacts support shock- and vibration-exposed applications, making them ideal for industrial machinery, automation and control, and building automation.

TE Con​​nectivity D-2970動態系列PCB連接器

TE Con​​nectivity的D-2970動態系列PCB連接器是緊湊的5mm間距線對板PCB連接器,具有可現場安裝的省時推入式接線端子。推入式夾具和中心鎖定桿不需要工具。與使用螺絲鎖閂系統的連接器相比,這可將配對時間縮短多達90%。中心鎖定桿還提供可聽和可觸知的配合反饋,以確保安全地配合,同時較低的插入力使用戶可以釋放電線而不會傷及指尖。 IP20“手指安全”外殼還可以防止操作員意外接觸帶電組件。

TE Con​​nectivity的D-2970動態系列PCB連接器提供三個或四個位置的配置。提供了三個傾斜的公頭連接器,公頭連接器的所有設計都與相同的母頭插頭匹配,以實現設計靈活性。

D-2970系列在55°C的典型環境應用溫度下可在高達20A和400V的電壓下運行,而無需進一步降額。連接器觸點支持受到衝擊和振動的應用,使其非常適合工業機械,自動化和控制以及樓宇自動化。
Dynamic系列強固型連接器 270° THR Male Header
TE Connectivity D-2970 Dynamic Series PCB Connectors

TE Connectivity's D-2970 Dynamic Series PCB Connectors are compact 5mm-pitch wire-to-board PCB connectors with field-installable, time-saving push-in clamp terminations. The push-in clamp and the center-locking lever do not require tooling. This trims mating time by up to 90% compared with connectors using screw-latch locking systems. The center-locking lever also offers audible and tactile mating feedback to ensure safe mating, while a lower insertion force allows users to release the wires without injuring their fingertips. An IP20 "finger-safe" housing also prevents unintended operator contact with live components.

TE Connectivity's D-2970 Dynamic Series PCB Connectors are offered in configurations with three or four positions. Three angled male headers are available, and all designs of the male header mate with the same female plug for design flexibility.

The D-2970 Series operates at up to 20A and 400V at a typical ambient application temperature of 55°C without further derating. The connector contacts support shock- and vibration-exposed applications, making them ideal for industrial machinery, automation and control, and building automation.

TE Con​​nectivity D-2970動態系列PCB連接器

TE Con​​nectivity的D-2970動態系列PCB連接器是緊湊的5mm間距線對板PCB連接器,具有可現場安裝的省時推入式接線端子。推入式夾具和中心鎖定桿不需要工具。與使用螺絲鎖閂系統的連接器相比,這可將配對時間縮短多達90%。中心鎖定桿還提供可聽和可觸知的配合反饋,以確保安全地配合,同時較低的插入力使用戶可以釋放電線而不會傷及指尖。 IP20“手指安全”外殼還可以防止操作員意外接觸帶電組件。

TE Con​​nectivity的D-2970動態系列PCB連接器提供三個或四個位置的配置。提供了三個傾斜的公頭連接器,公頭連接器的所有設計都與相同的母頭插頭匹配,以實現設計靈活性。

D-2970系列在55°C的典型環境應用溫度下可在高達20A和400V的電壓下運行,而無需進一步降額。連接器觸點支持受到衝擊和振動的應用,使其非常適合工業機械,自動化和控制以及樓宇自動化。
Dynamic系列強固型連接器 D2970 HDR 270 DEGREE 4POSN 1ROW Sn
TE Connectivity D-2970 Dynamic Series PCB Connectors

TE Connectivity's D-2970 Dynamic Series PCB Connectors are compact 5mm-pitch wire-to-board PCB connectors with field-installable, time-saving push-in clamp terminations. The push-in clamp and the center-locking lever do not require tooling. This trims mating time by up to 90% compared with connectors using screw-latch locking systems. The center-locking lever also offers audible and tactile mating feedback to ensure safe mating, while a lower insertion force allows users to release the wires without injuring their fingertips. An IP20 "finger-safe" housing also prevents unintended operator contact with live components.

TE Connectivity's D-2970 Dynamic Series PCB Connectors are offered in configurations with three or four positions. Three angled male headers are available, and all designs of the male header mate with the same female plug for design flexibility.

The D-2970 Series operates at up to 20A and 400V at a typical ambient application temperature of 55°C without further derating. The connector contacts support shock- and vibration-exposed applications, making them ideal for industrial machinery, automation and control, and building automation.

TE Con​​nectivity D-2970動態系列PCB連接器

TE Con​​nectivity的D-2970動態系列PCB連接器是緊湊的5mm間距線對板PCB連接器,具有可現場安裝的省時推入式接線端子。推入式夾具和中心鎖定桿不需要工具。與使用螺絲鎖閂系統的連接器相比,這可將配對時間縮短多達90%。中心鎖定桿還提供可聽和可觸知的配合反饋,以確保安全地配合,同時較低的插入力使用戶可以釋放電線而不會傷及指尖。 IP20“手指安全”外殼還可以防止操作員意外接觸帶電組件。

TE Con​​nectivity的D-2970動態系列PCB連接器提供三個或四個位置的配置。提供了三個傾斜的公頭連接器,公頭連接器的所有設計都與相同的母頭插頭匹配,以實現設計靈活性。

D-2970系列在55°C的典型環境應用溫度下可在高達20A和400V的電壓下運行,而無需進一步降額。連接器觸點支持受到衝擊和振動的應用,使其非常適合工業機械,自動化和控制以及樓宇自動化。
Dynamic系列強固型連接器 Female Push-in Plug
TE Connectivity D-2970 Dynamic Series PCB Connectors

TE Connectivity's D-2970 Dynamic Series PCB Connectors are compact 5mm-pitch wire-to-board PCB connectors with field-installable, time-saving push-in clamp terminations. The push-in clamp and the center-locking lever do not require tooling. This trims mating time by up to 90% compared with connectors using screw-latch locking systems. The center-locking lever also offers audible and tactile mating feedback to ensure safe mating, while a lower insertion force allows users to release the wires without injuring their fingertips. An IP20 "finger-safe" housing also prevents unintended operator contact with live components.

TE Connectivity's D-2970 Dynamic Series PCB Connectors are offered in configurations with three or four positions. Three angled male headers are available, and all designs of the male header mate with the same female plug for design flexibility.

The D-2970 Series operates at up to 20A and 400V at a typical ambient application temperature of 55°C without further derating. The connector contacts support shock- and vibration-exposed applications, making them ideal for industrial machinery, automation and control, and building automation.

TE Con​​nectivity D-2970動態系列PCB連接器

TE Con​​nectivity的D-2970動態系列PCB連接器是緊湊的5mm間距線對板PCB連接器,具有可現場安裝的省時推入式接線端子。推入式夾具和中心鎖定桿不需要工具。與使用螺絲鎖閂系統的連接器相比,這可將配對時間縮短多達90%。中心鎖定桿還提供可聽和可觸知的配合反饋,以確保安全地配合,同時較低的插入力使用戶可以釋放電線而不會傷及指尖。 IP20“手指安全”外殼還可以防止操作員意外接觸帶電組件。

TE Con​​nectivity的D-2970動態系列PCB連接器提供三個或四個位置的配置。提供了三個傾斜的公頭連接器,公頭連接器的所有設計都與相同的母頭插頭匹配,以實現設計靈活性。

D-2970系列在55°C的典型環境應用溫度下可在高達20A和400V的電壓下運行,而無需進一步降額。連接器觸點支持受到衝擊和振動的應用,使其非常適合工業機械,自動化和控制以及樓宇自動化。
Dynamic系列強固型連接器 Female Push-in Plug
TE Connectivity D-2970 Dynamic Series PCB Connectors

TE Connectivity's D-2970 Dynamic Series PCB Connectors are compact 5mm-pitch wire-to-board PCB connectors with field-installable, time-saving push-in clamp terminations. The push-in clamp and the center-locking lever do not require tooling. This trims mating time by up to 90% compared with connectors using screw-latch locking systems. The center-locking lever also offers audible and tactile mating feedback to ensure safe mating, while a lower insertion force allows users to release the wires without injuring their fingertips. An IP20 "finger-safe" housing also prevents unintended operator contact with live components.

TE Connectivity's D-2970 Dynamic Series PCB Connectors are offered in configurations with three or four positions. Three angled male headers are available, and all designs of the male header mate with the same female plug for design flexibility.

The D-2970 Series operates at up to 20A and 400V at a typical ambient application temperature of 55°C without further derating. The connector contacts support shock- and vibration-exposed applications, making them ideal for industrial machinery, automation and control, and building automation.

TE Con​​nectivity D-2970動態系列PCB連接器

TE Con​​nectivity的D-2970動態系列PCB連接器是緊湊的5mm間距線對板PCB連接器,具有可現場安裝的省時推入式接線端子。推入式夾具和中心鎖定桿不需要工具。與使用螺絲鎖閂系統的連接器相比,這可將配對時間縮短多達90%。中心鎖定桿還提供可聽和可觸知的配合反饋,以確保安全地配合,同時較低的插入力使用戶可以釋放電線而不會傷及指尖。 IP20“手指安全”外殼還可以防止操作員意外接觸帶電組件。

TE Con​​nectivity的D-2970動態系列PCB連接器提供三個或四個位置的配置。提供了三個傾斜的公頭連接器,公頭連接器的所有設計都與相同的母頭插頭匹配,以實現設計靈活性。

D-2970系列在55°C的典型環境應用溫度下可在高達20A和400V的電壓下運行,而無需進一步降額。連接器觸點支持受到衝擊和振動的應用,使其非常適合工業機械,自動化和控制以及樓宇自動化。
Dynamic系列強固型連接器 90° THR Male Header
TE Connectivity D-2970 Dynamic Series PCB Connectors

TE Connectivity's D-2970 Dynamic Series PCB Connectors are compact 5mm-pitch wire-to-board PCB connectors with field-installable, time-saving push-in clamp terminations. The push-in clamp and the center-locking lever do not require tooling. This trims mating time by up to 90% compared with connectors using screw-latch locking systems. The center-locking lever also offers audible and tactile mating feedback to ensure safe mating, while a lower insertion force allows users to release the wires without injuring their fingertips. An IP20 "finger-safe" housing also prevents unintended operator contact with live components.

TE Connectivity's D-2970 Dynamic Series PCB Connectors are offered in configurations with three or four positions. Three angled male headers are available, and all designs of the male header mate with the same female plug for design flexibility.

The D-2970 Series operates at up to 20A and 400V at a typical ambient application temperature of 55°C without further derating. The connector contacts support shock- and vibration-exposed applications, making them ideal for industrial machinery, automation and control, and building automation.

TE Con​​nectivity D-2970動態系列PCB連接器

TE Con​​nectivity的D-2970動態系列PCB連接器是緊湊的5mm間距線對板PCB連接器,具有可現場安裝的省時推入式接線端子。推入式夾具和中心鎖定桿不需要工具。與使用螺絲鎖閂系統的連接器相比,這可將配對時間縮短多達90%。中心鎖定桿還提供可聽和可觸知的配合反饋,以確保安全地配合,同時較低的插入力使用戶可以釋放電線而不會傷及指尖。 IP20“手指安全”外殼還可以防止操作員意外接觸帶電組件。

TE Con​​nectivity的D-2970動態系列PCB連接器提供三個或四個位置的配置。提供了三個傾斜的公頭連接器,公頭連接器的所有設計都與相同的母頭插頭匹配,以實現設計靈活性。

D-2970系列在55°C的典型環境應用溫度下可在高達20A和400V的電壓下運行,而無需進一步降額。連接器觸點支持受到衝擊和振動的應用,使其非常適合工業機械,自動化和控制以及樓宇自動化。
Dynamic系列強固型連接器 90° THR Male Header
TE Connectivity D-2970 Dynamic Series PCB Connectors

TE Connectivity's D-2970 Dynamic Series PCB Connectors are compact 5mm-pitch wire-to-board PCB connectors with field-installable, time-saving push-in clamp terminations. The push-in clamp and the center-locking lever do not require tooling. This trims mating time by up to 90% compared with connectors using screw-latch locking systems. The center-locking lever also offers audible and tactile mating feedback to ensure safe mating, while a lower insertion force allows users to release the wires without injuring their fingertips. An IP20 "finger-safe" housing also prevents unintended operator contact with live components.

TE Connectivity's D-2970 Dynamic Series PCB Connectors are offered in configurations with three or four positions. Three angled male headers are available, and all designs of the male header mate with the same female plug for design flexibility.

The D-2970 Series operates at up to 20A and 400V at a typical ambient application temperature of 55°C without further derating. The connector contacts support shock- and vibration-exposed applications, making them ideal for industrial machinery, automation and control, and building automation.

TE Con​​nectivity D-2970動態系列PCB連接器

TE Con​​nectivity的D-2970動態系列PCB連接器是緊湊的5mm間距線對板PCB連接器,具有可現場安裝的省時推入式接線端子。推入式夾具和中心鎖定桿不需要工具。與使用螺絲鎖閂系統的連接器相比,這可將配對時間縮短多達90%。中心鎖定桿還提供可聽和可觸知的配合反饋,以確保安全地配合,同時較低的插入力使用戶可以釋放電線而不會傷及指尖。 IP20“手指安全”外殼還可以防止操作員意外接觸帶電組件。

TE Con​​nectivity的D-2970動態系列PCB連接器提供三個或四個位置的配置。提供了三個傾斜的公頭連接器,公頭連接器的所有設計都與相同的母頭插頭匹配,以實現設計靈活性。

D-2970系列在55°C的典型環境應用溫度下可在高達20A和400V的電壓下運行,而無需進一步降額。連接器觸點支持受到衝擊和振動的應用,使其非常適合工業機械,自動化和控制以及樓宇自動化。
Dynamic系列強固型連接器 180° THR Male Header
TE Connectivity D-2970 Dynamic Series PCB Connectors

TE Connectivity's D-2970 Dynamic Series PCB Connectors are compact 5mm-pitch wire-to-board PCB connectors with field-installable, time-saving push-in clamp terminations. The push-in clamp and the center-locking lever do not require tooling. This trims mating time by up to 90% compared with connectors using screw-latch locking systems. The center-locking lever also offers audible and tactile mating feedback to ensure safe mating, while a lower insertion force allows users to release the wires without injuring their fingertips. An IP20 "finger-safe" housing also prevents unintended operator contact with live components.

TE Connectivity's D-2970 Dynamic Series PCB Connectors are offered in configurations with three or four positions. Three angled male headers are available, and all designs of the male header mate with the same female plug for design flexibility.

The D-2970 Series operates at up to 20A and 400V at a typical ambient application temperature of 55°C without further derating. The connector contacts support shock- and vibration-exposed applications, making them ideal for industrial machinery, automation and control, and building automation.

TE Con​​nectivity D-2970動態系列PCB連接器

TE Con​​nectivity的D-2970動態系列PCB連接器是緊湊的5mm間距線對板PCB連接器,具有可現場安裝的省時推入式接線端子。推入式夾具和中心鎖定桿不需要工具。與使用螺絲鎖閂系統的連接器相比,這可將配對時間縮短多達90%。中心鎖定桿還提供可聽和可觸知的配合反饋,以確保安全地配合,同時較低的插入力使用戶可以釋放電線而不會傷及指尖。 IP20“手指安全”外殼還可以防止操作員意外接觸帶電組件。

TE Con​​nectivity的D-2970動態系列PCB連接器提供三個或四個位置的配置。提供了三個傾斜的公頭連接器,公頭連接器的所有設計都與相同的母頭插頭匹配,以實現設計靈活性。

D-2970系列在55°C的典型環境應用溫度下可在高達20A和400V的電壓下運行,而無需進一步降額。連接器觸點支持受到衝擊和振動的應用,使其非常適合工業機械,自動化和控制以及樓宇自動化。
Dynamic系列強固型連接器 180° THR Male Header
TE Connectivity D-2970 Dynamic Series PCB Connectors

TE Connectivity's D-2970 Dynamic Series PCB Connectors are compact 5mm-pitch wire-to-board PCB connectors with field-installable, time-saving push-in clamp terminations. The push-in clamp and the center-locking lever do not require tooling. This trims mating time by up to 90% compared with connectors using screw-latch locking systems. The center-locking lever also offers audible and tactile mating feedback to ensure safe mating, while a lower insertion force allows users to release the wires without injuring their fingertips. An IP20 "finger-safe" housing also prevents unintended operator contact with live components.

TE Connectivity's D-2970 Dynamic Series PCB Connectors are offered in configurations with three or four positions. Three angled male headers are available, and all designs of the male header mate with the same female plug for design flexibility.

The D-2970 Series operates at up to 20A and 400V at a typical ambient application temperature of 55°C without further derating. The connector contacts support shock- and vibration-exposed applications, making them ideal for industrial machinery, automation and control, and building automation.

TE Con​​nectivity D-2970動態系列PCB連接器

TE Con​​nectivity的D-2970動態系列PCB連接器是緊湊的5mm間距線對板PCB連接器,具有可現場安裝的省時推入式接線端子。推入式夾具和中心鎖定桿不需要工具。與使用螺絲鎖閂系統的連接器相比,這可將配對時間縮短多達90%。中心鎖定桿還提供可聽和可觸知的配合反饋,以確保安全地配合,同時較低的插入力使用戶可以釋放電線而不會傷及指尖。 IP20“手指安全”外殼還可以防止操作員意外接觸帶電組件。

TE Con​​nectivity的D-2970動態系列PCB連接器提供三個或四個位置的配置。提供了三個傾斜的公頭連接器,公頭連接器的所有設計都與相同的母頭插頭匹配,以實現設計靈活性。

D-2970系列在55°C的典型環境應用溫度下可在高達20A和400V的電壓下運行,而無需進一步降額。連接器觸點支持受到衝擊和振動的應用,使其非常適合工業機械,自動化和控制以及樓宇自動化。
Dynamic系列強固型連接器 270° THR Male Header
TE Connectivity D-2970 Dynamic Series PCB Connectors

TE Connectivity's D-2970 Dynamic Series PCB Connectors are compact 5mm-pitch wire-to-board PCB connectors with field-installable, time-saving push-in clamp terminations. The push-in clamp and the center-locking lever do not require tooling. This trims mating time by up to 90% compared with connectors using screw-latch locking systems. The center-locking lever also offers audible and tactile mating feedback to ensure safe mating, while a lower insertion force allows users to release the wires without injuring their fingertips. An IP20 "finger-safe" housing also prevents unintended operator contact with live components.

TE Connectivity's D-2970 Dynamic Series PCB Connectors are offered in configurations with three or four positions. Three angled male headers are available, and all designs of the male header mate with the same female plug for design flexibility.

The D-2970 Series operates at up to 20A and 400V at a typical ambient application temperature of 55°C without further derating. The connector contacts support shock- and vibration-exposed applications, making them ideal for industrial machinery, automation and control, and building automation.

TE Con​​nectivity D-2970動態系列PCB連接器

TE Con​​nectivity的D-2970動態系列PCB連接器是緊湊的5mm間距線對板PCB連接器,具有可現場安裝的省時推入式接線端子。推入式夾具和中心鎖定桿不需要工具。與使用螺絲鎖閂系統的連接器相比,這可將配對時間縮短多達90%。中心鎖定桿還提供可聽和可觸知的配合反饋,以確保安全地配合,同時較低的插入力使用戶可以釋放電線而不會傷及指尖。 IP20“手指安全”外殼還可以防止操作員意外接觸帶電組件。

TE Con​​nectivity的D-2970動態系列PCB連接器提供三個或四個位置的配置。提供了三個傾斜的公頭連接器,公頭連接器的所有設計都與相同的母頭插頭匹配,以實現設計靈活性。

D-2970系列在55°C的典型環境應用溫度下可在高達20A和400V的電壓下運行,而無需進一步降額。連接器觸點支持受到衝擊和振動的應用,使其非常適合工業機械,自動化和控制以及樓宇自動化。
Dynamic系列強固型連接器 270° THR Male Header
TE Connectivity D-2970 Dynamic Series PCB Connectors

TE Connectivity's D-2970 Dynamic Series PCB Connectors are compact 5mm-pitch wire-to-board PCB connectors with field-installable, time-saving push-in clamp terminations. The push-in clamp and the center-locking lever do not require tooling. This trims mating time by up to 90% compared with connectors using screw-latch locking systems. The center-locking lever also offers audible and tactile mating feedback to ensure safe mating, while a lower insertion force allows users to release the wires without injuring their fingertips. An IP20 "finger-safe" housing also prevents unintended operator contact with live components.

TE Connectivity's D-2970 Dynamic Series PCB Connectors are offered in configurations with three or four positions. Three angled male headers are available, and all designs of the male header mate with the same female plug for design flexibility.

The D-2970 Series operates at up to 20A and 400V at a typical ambient application temperature of 55°C without further derating. The connector contacts support shock- and vibration-exposed applications, making them ideal for industrial machinery, automation and control, and building automation.

TE Con​​nectivity D-2970動態系列PCB連接器

TE Con​​nectivity的D-2970動態系列PCB連接器是緊湊的5mm間距線對板PCB連接器,具有可現場安裝的省時推入式接線端子。推入式夾具和中心鎖定桿不需要工具。與使用螺絲鎖閂系統的連接器相比,這可將配對時間縮短多達90%。中心鎖定桿還提供可聽和可觸知的配合反饋,以確保安全地配合,同時較低的插入力使用戶可以釋放電線而不會傷及指尖。 IP20“手指安全”外殼還可以防止操作員意外接觸帶電組件。

TE Con​​nectivity的D-2970動態系列PCB連接器提供三個或四個位置的配置。提供了三個傾斜的公頭連接器,公頭連接器的所有設計都與相同的母頭插頭匹配,以實現設計靈活性。

D-2970系列在55°C的典型環境應用溫度下可在高達20A和400V的電壓下運行,而無需進一步降額。連接器觸點支持受到衝擊和振動的應用,使其非常適合工業機械,自動化和控制以及樓宇自動化。
Dynamic系列強固型連接器 Dynamic D-3100S Receptacle housing
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3100S Tab Housing Panel type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
供應商:
Dynamic系列強固型連接器 Dynamic D-3100S Tab Housing Free Hanging type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
供應商:
Dynamic系列強固型連接器 Dynamic D-3100S Board-Mounting Header Horizontal type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3100S Board-Mounting Header Horizontal type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3100S Receptacle housing
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3100S Board-Mounting Horizontal type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3100S Board-Mounting Header Vertical type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3100D Receptacle housing
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3100D Tab housing Panel type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3100D Tab housing Free Hanging type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3100D Board-Mounting Header Horizontal type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3100D Board-Mounting Header Vertical type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3100M Receptacle housing
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3100M Board-Mounting Header Horizontal type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3100M Board-Mounting Header Vertical type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3200S Receptacle housing
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3200 Tab housing Panel type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3200S Tab housing Free Hanging type)
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3200S Board-Mounting Header Horizontal type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3200S Board-Mounting Header Vertical type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3200M Receptacle housing
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3200M Tab housing Panel type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3200M Tab housing Free Hanging type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3200M Board-Mounting Header Horizontal type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynamic D-3200M Board-Mounting Header Vertical type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynami D-3200M Receptacle housing
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynami D-3200M Board-Mounting Header Horizontal type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynami D-3200M Board-Mounting Header Vertical type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynami D-3200T Receptacle housin Single-Rowg
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynami D-3200T Receptacle housing Double-Row
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynami D-3200T Board-Mounting Header Horizontal type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynami D-3200F Receptacle housing
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynami D-3200F Board-Mounting Header Horizontal type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynami D-3500D Receptacle housing
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynami D-3500D Tab housing Panel type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynami D-3500D Tab housing Free Hanging type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynami D-3500D Board-Mounting Header Horizontal type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。
Dynamic系列強固型連接器 Dynami D-3500D Board-Mounting Header Vertical type
Series introduction
The 3000 series is the main DynamicSeries. Theyare widely used as industrial 'signal’ and 'power' connectors. Pin layout comes in three types: standard 3.81mm pitch, high
voltage 5.08mm pitch type and 7.5mmspringclamptype.
The former one is used for signal circuits and the latter two are for high-voltagecircuits.
For power source usage, it meets recentdemands for small size and high power which
comply with miniaturisation of the machinery. The newly developed copper alloy cancarryahighercurrentof 15A per pole despiteits smallsize.
This concept is based on the development strategy of the DynamicSeriestocoveras wide a range of solutions for as many customers as possible.
This concept makes the D-3000 series terminals fit all D-3000 housings, and the wide variety of which means that it is not necessary for a customer to look outside of this range for everyrequirement.

系列介紹
它是Dynamic系列的主要系列,被 廣 泛 用 作 工 業 設 備的“信號用”和“電源用”連接器。

針腳間距配備有標準3.81mm,間距和高電壓型的5.08mm間距兩種,前者主要為信號電路和電源電路用的規格,後者為高壓電源電路用的規格。

特別是電源用規格,隨著最近設備小型化,為滿足小型高功率的要求,使用新開發的銅合金,每位能夠承載15A的大電流。

開發的基本概念是“對於客戶各式使用用途, Dynamic系列都要支持。為此,要完善殼體和線路板安裝式的多樣化。 ”。正如 其 概 念, D-3000系列 的 端子能夠適用於該系列的所有殼體,通過其殼體的豐富變化,Dynamic系列可滿足各種不同用途及設備用連接器的需求。

D-3000系列離初始開發已有十多年的銷售業績,在客戶提出意見的過程中獲得了發展。而且,目前也在進一步繼續發展延伸。