■ Connector VCF4-1003 for Mini (Shrouded) ISO Relays Five position connector with snap-in terminal position assurance lock (ships unassembled). Integral tab interlocks connector and relay.
■ Connector VCF7-1000 for Maxi ISO Relays Four position connector has built-in features to lock in terminals

■ PCB Socket With the solder able connector Micro ISO relays with plug-in terminals can be mounted on lead frames. This allows easy and reasonable replacement in case of service.
■ Connector5 pole connector with snap-in pin to lock in frame.
■ Connector with mounting flap5 pole connector that can be mounted individually or interlocked.The connector has a snap-in pin to lock in frame.The mounting bracket also allows screw-on

■ Noise level below 50dBA
■ Pin assignment according to ISO 7588 part 3
■ Plug-in terminals
■ Customized versions on request
– Special marking
– Special covers (e.g. notches, release features)

■ High current version with limiting continuous current 30A at 85°C
■ Pin assignment according to ISO 7588 part 3
■ Customized versions on request
– 24VDC versions with special contact gap
– Integrated components (e.g. diode)
– Customized marking
– Special covers (e.g. notches, release features)
– For latching version refer to Micro Relay Latching
– For low noise version refer to Micro Relay Low Noise
– For high current version refer to part number table

■ Pin assignment similar to ISO 7588 part 1
■ Plug-in terminals
■ Customized versions on request
– 24VDC versions with contact gap >0.8mm
– Integrated components (e.g. resistor, diode)
– Customized marking/color– Special covers (e.g. notches, release features, brackets)
– Various contact arrangements and material

■ Pin assignment similar to ISO 7588 part 1
■ Plug-in or PCB terminals Customized versions on request
– 24VDC versions with contact gap >0.8mm
– 48VDC version on request– Integrated components (e.g. resistor, diode)
– Customized marking/color
– Special covers (e.g. notches, release features, brackets)– Various contact arrangements and materials
– For latching (bistable) version refer to Power Relay F7 A Latching or Mini Relay Latching
– For shrouded/weatherproof dust cover versions refer to Shrouded Power Relay F4 A and F4

■ Pin assignment similar to ISO 7588 part 1
■ Plug-in terminals
■ Customized versions on request
– Integrated components (e.g. resistor, diode)– Customized marking/color
– Special cover with bracket

■ Pin assignment similar to ISO 7588 part 1
■ Customized versions on request
– 24VDC versions with contact gap >0.8mm
– Integrated components (e.g. resistor, diode)
– Customized marking/color– Special covers (e.g. notches, release features, brackets)