■ Compact package
■ Two and four pole form C contact arrangements
■ Polycarbonate or nylon dust cover
■ Various mounting configurationsn
■ Indicator lamp and push-to-reset options available
■ Various contact materials available for specific load requirements

■ Occupies very small panelspace
■ May be mounted singly, incontinuous rows or ingroups
■ Available with screwterminal molded socket
■ 4 SPDT contacts
■ File E15631, File LR29186

■ 2/3 pole 10A, 2 form C (CO) or 3 form C (CO) contacts
■ DC and AC coils
■ Mechanical indicator as standard
■ Electrical indicator
■ New test system with front operated finger protected push-to-test button and integral locking test tab
■ White write on panel

SNR
■高靈敏度線圈170mW
■用於DIN導軌插座的堅固線圈針腳
■ 4kV線圈-觸點，6/8mm電氣間隙/爬電距離
■強化絕緣
■系統寬度減少
RT
■高靈敏度線圈400mW
■無鎘觸點■強化絕緣
■ 4kV/8mm線圈-觸點
PT
■高靈敏度線圈400mW
■無鎘觸點■強化絕緣
■ 4kV/8mm線圈-觸點
■手動測試標籤
■機械與電氣指示器
PT
■高靈敏度線圈
■低高度29/33mm
■無鎘觸點■機械指示器
■手 動 測 試 標 簽，可 選 鎖 定
■可選LED，保 護二 級 管

■ 1 pole 6A, 1 form C (CO), 1 form A (NO)
■ Only 5mm widen
■ Flat pack version available
■ Sensitive coil 170mW
■ Reinforced insulation (protection classII)
■ Strong coil pins for DIN-rail socket
■ Allows high function- / packaging density
■ Cadmium-free contacts, AgNi 90/10 for AC-loads

■ DC and AC coil
■ Mono-or bistable coil
■ Reinforced insulation
■ WG type available (IEC 60335-1)
■ High ambient temperature version (105°C)
■ THR (reflow) version
■ Sensitive version
■ Bifurcated contacts

■ 1 pole 16 A, 2 pole 8 A, 1 form C (1 CO) contact or 2 form C (2 CO) contacts
■ DC or AC coil, sensitive coil 400 mW
■ Reinforced insulation, protection class II (VDE 0700)
■ 4kV/8mm dielectric strength between coil and contact
■ Manual test tab, optionally lockable
■ Version with mechanical and/or electrical indicator optional
■ Suitable for use in Tyco Electronics’ standard RT sockets
■ Recycleable packaging

■ Dual coil latching relay accepts a momentary impulse to one coil to latch and a second impulse to the other coil to release
■ Clear polycarbonate dust cover with 11- or 20-pin plug
■ 11- or 20-pin octal-style plug connector
■ AC and DC coils
■ Two, four, and five pole Form C (CO) contact arrangement

■ 5 to 10A current capability
■ Contact arrangements of 1, 2 and 3 form C (CO)
■ Octal type termination for quick installation
■ Indicator lamp available on certain models

■ 1 Form X, 2 Form A and 2 Form C contact arrangements
■ 10 amp current rating
■ Magnetic blow-out
■ Various mounting options
■ Indicator lamp available

■ Magnetic latching relay
■ Single or dual wound DC coils or single wound AC coils
■ 1, 2, and 3 pole Form C contact arrangement n Reset occurs by reversing polarity in a single coil relay or by energizing the reset winding in dual coil relays
■ Various mounting and socket styles

■ AC coils: 5-240VAC, 50/60 Hz.; DC coils 6-110VDC
■ Contact arrangements of 1 form X, 1-3 form A and 1-4 form C
■ Wide selection of termination and mounting styles
■ PC terminals available
■ Push-to-test button and indicator lamp options
■ Sockets available for panel, DIN rail or PCB mounting
■ Class B coil insulation

■ AC coils 24, 120 & 240V 50/60 Hz.; DC 12 & 24VDC.
■ Contact arrangement to 3PDT
■ Sockets available for all models.
■ Accepted pin pattern for HVAC industry.
■ Primarily designed for the HVAC industry.

■ 2/3 pole 10/16A, 2 form C (CO) or 3 form C (CO) contacts
■ Switching capacity up to 6000VA
■ DC or AC coil
■ Mechanical indicator
■ Push-to-test button
■ Plug-in version, PCB terminals, chassis- or DIN-rail mount

■ 2 pole 12A, 3 pole 10A or 4 pole 6A, 2, 3 or 4 form C (CO) contacts
■ DC or AC coil
■ Switching performance up to 3000VA
■ Relay height 29mmn Mechanical indicator, optional LED and protection diode
■ Manual test tab, optionally lockable
■ White marking tabs

■ 2 Form C contact arrangement
■ AC and DC coils
■ Socket, PCB and top flange mounting options

■ 15 amp rating
■ Contact arrangements 1-3 form A, 1-3 form B, 1-3 form C, 1 form X, 1 form Y, 1 form Z
■ Open or enclosed
■ Plain or bracket mount dust covers
■ Optional indicator lamp and push-to-test button
■ Several termination and mounting style

■ AC coils 6 to 277VAC 50/60Hz, DC 6 to 110VCD
■ Contact arrangement up to 2 form C (CO)
■ .250” combination push-on/solder terminals or PC terminals
■ Side flange and top flange mounting
■ Designed to meet VDE space requirements: Class B coil insulation